Economic Clarifier for Sparkling Clear Water! Cures cloudy water, removes ultra fine particles, removes color, while improving filter efficiency. Recommended for Pool Openings. Cloudy water can be caused by bacteria, poor water balance, algae or fine particles of impurities. Simply Clear is a very low molecular weight, cationic flocculent that will combine tiny particles of dirt, dead algae and color into masses large enough for the filter to trap. Simple to apply and safe to handle. Simply clear works well over a wide pH range and will not affect pool pH as does alum. The dosage of Simply Clear depends on the amount of dirt, color, or particles present.
For an initial treatment, use 64 oz. for every 10,000 gallons of pool volume. Distribute evenly around the perimeter of the pool. Continue filter operation during treatment period, if after 24 hours noticeable color or turbidity exists, a second treatment is recommended. For best results, apply in the evening and allow filter to run 6 to 8 hours. For pool openings, use of Simply Clear will reduce the time required to restore clear water quality, use 1 gallon per 10,000 gallons.
- Simply clear works well over a wide pH range and will not affect pool pH as does alum.