Phoenix Super Erace

Highly concentrated formula removes sequestering and chelating metals (iron, copper, manganese), removes metal stains, restores water clarity as well as reduces scale formation on pumps and heaters. Super Erace works by forming a clear insoluble crystal with the metal ions normally found in the pool. These insoluble crystals are then removed by filtration. It is important to keep the filtration system operating for 72 consecutive hours after addition of Super Erace to insure complete removal.

Metal removal: Add one quart per 10,000 gallons of pool water with the filtration system operating. Maintain pH level and check often. Backwash the filter at the end of 24 and 72 hours. Cartridge filters should be removed and cleaned as needed. Several cleanings may be required in the first 24 hours.

Stain removal: Add two quarts per 10,000 gallons of pool water with the circulating system turned off. Add the product around the perimeter of the pool allowing it to contact the pool wall as it settles into the water. After about one hour, start the system and maintain filtration for 72 hours and backwash the filter as above. Super Erace will remove metal stains from both concrete and vinyl liner pools.

Maintenance: Regular use of Super Erace will prevent staining and keep the plumbing in good condition. Add 4 oz. per 1000 gallons of new water added to the pool.