Phoenix Liquid Floc

Product Details

Fast acting settling agent, safe for all pools and filters! Contains no metals and will not foam. This fast acting settling agent is designed to clear cloudy to severely cloudy water. Before adding Liquid Floc backwash the filter and make sure pump is running. The filter should be on a recirculation setting, if available. For maximum performance adjust pH to 7.0 – 7.2 and use when free chlorine level is below 3 ppm.

When adding Liquid Floc apply at a rate of 8 ounces per 10,000 gallons of water by dispersing appropriate amount of Liquid Floc evenly across the surface of the pool. Do not add directly to skimmer. After addition allow the pump to circulate the water for 1 to 2 hours, turning pump off after 2 hours. Allow the water to remain un-disturbed for at least 12 to 24 hours so that the Liquid Floc can settle debris on the bottom of the pool. This product is most effective in severely cloudy pools. To increase the effectiveness increase the dosage by 2 to 3 times. Once all debris has settled make sure to vacuum up the waste.

Product Features

  • Safe for all pools and filters.

Additional Information